D-D FMR75 KIT with Pump

Stock Status: In Stock
Information

D&D H2Ocean FMR75 Fluidised Media Reactor with Pump & Accessories

The H2Ocean Fluidised Reactor with Pump (also known as the Nutrifix Reactor) has been specially developed to offer fast and efficient fluidising of a number of materials for freshwater and marine aquariums.

The fluidising device is compatible with Rowaphos or Phosphate Removers, carbon, biological sand and Nutrifix Bio-Pellets. The reactor can be mounted in variable positions and can stand inside the sump, beside the sump or hung onto the sump. Alternatively the H20cean Fluidised Reactor can also be clamped directly to the side of the tank for easy accessibility, maintenance and cleaning.

The reactor comes complete with the following parts: 3 x lengths of clear plastic tubing, flow adjustment tap, 8 x cable ties for securing the pipework, 2 Grades of media sponges and a non-return valve as well as the pump with a maximum flow rate of 1500 lires per hour.

The base of the H2Ocean Fluidised Reactor has been developed to disperse an even flow of water through 360 degree angles down the central downpipe eradicating deadspots.  A lower perforated diffusion plate acts as a lower support for the media when the device is switched off, thus creating an empty plenum area below for a higher fluidisng efficiency rate.

SUITABLE FOR

  • Rowaphos or Phosphate Removers
  • Nutrifix Bio Pellets (Up to 700ml) 
  • Carbon
  • Biological Sand as a fluidised sand filter

DIMENSIONS

  • 128mm x 94mm x 440mm (including fittings and lid)
  • Reaction tube outer diameter - 80mm
  • Tube height between upper/lower perforated plates - 340mm
  • Can hang on glass up to 25mm
  • Designed to be the correct height to hang on a 15" Sump (will stand inside smaller sumps or hang onto taller sumps).

 

IMPORTANT NOTE

THE HOSE CONNECTORS ON THE TOP OF THE REACTOR ARE A TIGHT PUSH FIT ONTO THE LID OF THE REACTOR HOWEVER IF THE UNIT IS TO BE USED IN A CABINET UNDER THE AQUARIUM THEN WE RECOMMEND THAT YOU GLUE THESE FITTINGS IN PLACE FOR EXTRA SECURITY ONCE THE FINAL POSITION IS DETERMINED. THIS WILL PROVIDE EXTRA ASSURANCE THAT THE CONNECTOR WILL NOT COME OFF AT SOME TIME IN THE FUTURE IF THE REACTOR IS KNOCKED OR DISTURBED OR THE CONNECTORS WERE NOT PUSHED ON PROPERLY IN THE FIRST PLACE. FAILURE TO FOLLOW THIS MAY RESULT IN LOSS OF WATER FROM THE AQUARIUM.

Specifications
  • Product Code:
    FMR75KIT
Reviews
product review overlay image

Customer reviews

No reviews left yet
Write A Review

No reviews have been left for this product, be the first to leave a review